Search for: All records

Abstract Thermobarometry in the Northern Snake Range metamorphic core complex (Nevada, USA) implies pre‐extensional burial of footwall rocks to 21–30 km depths, while geologic field relationships support 7–13 km pre‐extensional depths. This has fueled a 40‐year‐long debate, which has far‐reaching implications for how pressure data are interpreted in orogenic settings. Here, we test published models for deep burial by integrating regional cross‐section reconstructions with new (n = 95) and published (n = 132) peak temperature measurements, field relationships and published geophysical data. Burial of Neoproterozoic‐Cambrian metasedimentary footwall rocks to 21–30 km depths is incompatible with a regional seismic reflection cross‐section that interprets the top of Precambrian crystalline basement at 17–20 km depths. Two reconstructed cross‐sections define 42 km and 50–65 km of displacement on the master detachment fault and demonstrate that the higher displacement ranges (>66–94 km and >76–102 km, respectively) necessary to exhume rocks from 21 to 30 km depths are not possible without spatially overlapping Cambrian rocks preserved in its footwall and hanging wall. The 22°C/km average Late Cretaceous thermal gradient predicted by thermobarometry is incompatible with the 46 ± 10°C/km Late Cretaceous peak thermal gradient that we calculate down to 15–20 km pre‐extensional depths. Field relationships that rule out large‐magnitude shortening invalidate models for deep footwall burial via thrust or reverse faulting. We conclude that there is no scenario for deep burial that is compatible with structural/geophysical constraints, crustal thermal architecture, and field relationships. This necessitates a non‐lithostatic interpretation for pressures from the Northern Snake Range, similar to recent interpretations for other Cordilleran metamorphic core complexes. 

Documenting the kinematics of detachment faults can provide fundamental insights into the ways in which the lithosphere evolves during high-magnitude extension. Although it has been investigated for 70 yr, the displacement magnitude on the Northern Snake Range décollement in eastern Nevada remains vigorously debated, with published estimates ranging between <10 and 60 km. To provide constraints on displacement on the Northern Snake Range décollement, we present retrodeformed cross sections across the west-adjacent Schell Creek and Duck Creek Ranges, which expose a system of low-angle faults that have previously been mapped as thrust faults. We reinterpret this fault system as the extensional Schell Creek Range detachment system, which is a stacked series of top-down-to-the-ESE brittle normal faults with 5°–10° stratigraphic cutoff angles that carry 0.1–0.5-km-thick sheets that are up to 8–13 km long. The western portion of the Schell Creek Range detachment system accomplished ~5 km of structural attenuation and is folded across an antiformal culmination that progressively grew during extension. Restoration using an Eocene unconformity as a paleohorizontal marker indicates that faults of the Schell Creek Range detachment system were active at ~5°–10°E dips. The Schell Creek Range detachment system accommodated 36 km of displacement via repeated excision, which is bracketed between ca. 36.5 and 26.1 Ma by published geochronology. Based on their spatial proximity, compatible displacement sense, overlapping deformation timing, and the similar stratigraphic levels to which these faults root, we propose that the Schell Creek Range detachment system represents the western breakaway system for the Northern Snake Range décollement. Debates over the pre-extensional geometry of the Northern Snake Range décollement hinder an accurate cumulative extension estimate, but our reconstruction shows that the Schell Creek Range detachment system fed at least 36 km of displacement eastward into the Northern Snake Range décollement. 

ABSTRACT Terrestrial sedimentary archives record critical information about environment and climate of the past, as well as provide insights into the style, timing, and magnitude of structural deformation in a region. The Cretaceous Newark Canyon Formation, located in central Nevada, USA, was deposited in the hinterland of the Sevier fold–thrust belt during the North American Cordilleran orogeny. While previous research has focused on the coarser-grained, fluvial components of the Newark Canyon Formation, the carbonate and finer-grained facies of this formation remain comparatively understudied. A more complete understanding of the Newark Canyon Formation provides insights into Cretaceous syndeformational deposition in the Central Nevada thrust belt, serves as a useful case study for deconvolving the influence of tectonic and climatic forces on sedimentation in both the North American Cordillera and other contractional orogens, and will provide a critical foundation upon which to build future paleoclimate and paleoaltimetry studies. We combine facies descriptions, stratigraphic measurements, and optical and cathodoluminescence petrography to develop a comprehensive depositional model for the Newark Canyon Formation. We identify six distinct facies that show that the Newark Canyon Formation evolved through four stages of deposition: 1) an anastomosing river system with palustrine interchannel areas, 2) a braided river system, 3) a balance-filled, carbonate-bearing lacustrine system, and 4) a second braided river system. Although climate undoubtedly played a role, we suggest that the deposition and coeval deformation of the synorogenic Newark Canyon Formation was in direct response to the construction of east-vergent contractional structures proximal to the type section. Comparison to other contemporary terrestrial sedimentary basins deposited in a variety of tectonic settings provides helpful insights into the influences of regional tectonics, regional and global climate, catchment characteristics, underlying lithologies, and subcrop geology in the preserved sedimentary record. 

Abstract The timing of deformation and deposition within syntectonic basins provides critical information for understanding the evolution of strain in mountain belts. In the U.S. Cordillera, contractional deformation was partitioned between the Sevier thrust belt in Utah and several structural provinces in the hinterland in Nevada. One hinterland province, the Central Nevada thrust belt (CNTB), accommodated up to ∼15 km of shortening; however, in most places, this deformation can only be bracketed between Permian and Eocene. Cretaceous deposits of the Newark Canyon Formation (NCF), which are sparsely exposed along the length of the CNTB, offer the opportunity to constrain deformation timing. Here, we present mapping and U-Pb zircon geochronology from the NCF in the Diamond Mountains, which demonstrate deposition of the NCF during proximal CNTB deformation. Deposition of the basal NCF member was under way no earlier than ca. 114 Ma, a tuff in the middle part of the section was deposited at ca. 103 Ma, and the youngest member was deposited no earlier than ca. 99 Ma. Intraformational angular unconformities and abrupt along- and across-strike thickness changes indicate that NCF deposition was related to growth of an east-vergent fault-propagation fold. Clast compositions define unroofing of upper Paleozoic sedimentary rocks, which we interpret as the progressive erosion of an anticline ∼10 km to the west. CNTB deformation was contemporaneous with shortening in the Sevier thrust belt, which defines middle Cretaceous strain partitioning between frontal and interior components of the Cordillera. Strain partitioning may have been promoted by renewed underthrusting during a period of high-flux magmatism. 

Abstract Documenting the spatio‐temporal progression of deformation within fold‐thrust belts is critical for understanding orogen dynamics. In the North American Cordillera, the geometry, magnitude, and timing of contractional deformation across a broad region of Nevada known as the “Sevier hinterland” has been difficult to characterize due to minimal exposures of syn‐contractional sedimentary rocks and overprinting of Cenozoic extension. To address this, we present geologic mapping and U‐Pb zircon geochronology from three exposures of the Cretaceous Newark Canyon Formation (NCF) in central Nevada. In the Cortez Mountains, NCF deposition between ∼119 and 110 Ma is hypothesized to be related to generation of relief by thrusting/folding to the west. In the Fish Creek Range, NCF deposition between ∼130 and 100 Ma was related to motion on an east‐vergent thrust fault. In the Pancake Range, NCF deposition is bracketed between ∼129 and 66 Ma and post‐dated east‐vergent folding. We incorporate these timing constraints into a compilation of deformation timing in the Sevier hinterland. Late Jurassic (∼165 and 155 Ma) shortening, which is largely post‐dated shortening in the Luning‐Fencemaker thrust belt to the west and pre‐dated initial deformation in the Sevier fold‐thrust belt to the east, is interpreted to represent diffuse, low‐magnitude deformation that accompanied eastward propagation of the basal Cordilleran décollement. Cretaceous (∼130 and 75 Ma) hinterland shortening, which includes deformation associated with NCF deposition, was contemporaneous with shortening in the Sevier fold‐thrust belt. This is interpreted to represent long‐duration strain partitioning between the foreland and hinterland during continued coupling above the basal décollement and the progressive westward underthrusting of thick North American lower‐middle crust. 

Abstract Mesozoic crustal shortening in the North American Cordillera’s hinterland was related to the construction of the Nevadaplano orogenic plateau. Petrologic and geochemical proxies in Cordilleran core complexes suggest substantial Late Cretaceous crustal thickening during plateau construction. In eastern Nevada, geobarometry from the Snake Range and Ruby Mountains-East Humboldt Range-Wood Hills-Pequop Mountains (REWP) core complexes suggests that the ~10–12 km thick Neoproterozoic-Triassic passive-margin sequence was buried to great depths (>30 km) during Mesozoic shortening and was later exhumed to the surface via high-magnitude Cenozoic extension. Deep regional burial is commonly reconciled with structural models involving cryptic thrust sheets, such as the hypothesized Windermere thrust in the REWP. We test the viability of deep thrust burial by examining the least-deformed part of the REWP in the Pequop Mountains. Observations include a compilation of new and published peak temperature estimates (n=60) spanning the Neoproterozoic-Triassic strata, documentation of critical field relationships that constrain deformation style and timing, and new 40Ar/39Ar ages. This evidence refutes models of deep regional thrust burial, including (1) recognition that most contractional structures in the Pequop Mountains formed in the Jurassic, not Cretaceous, and (2) peak temperature constraints and field relationships are inconsistent with deep burial. Jurassic deformation recorded here correlates with coeval structures spanning western Nevada to central Utah, which highlights that Middle-Late Jurassic shortening was significant in the Cordilleran hinterland. These observations challenge commonly held views for the Mesozoic-early Cenozoic evolution of the REWP and Cordilleran hinterland, including the timing of contractional strain, temporal evolution of plateau growth, and initial conditions for high-magnitude Cenozoic extension. The long-standing differences between peak-pressure estimates and field relationships in Nevadan core complexes may reflect tectonic overpressure.